The addresses written to were remembered only in the browser that sent
the message, as a list of recent recipients, so a new device or a cleared
browser suggested nobody. After each confirmed send, the recipients who
are not contacts yet are now saved on the server, in an address book of
their own called Collected, so they are suggested everywhere.
- Only addresses on no card in any address book, own or shared, are
added, de-duplicated, and never the sender's own identities.
- The book is created on first use and remembered by id in the synced
settings, so its name can be anything; a deleted one is replaced.
- Names are split as the contact editor does ("Smith, Jane").
- Settings > Calendar & contacts > Contacts has a switch, on by default,
as mail clients do; the book can be emptied or deleted like any other.
New strings: 3, in all ten catalogs (1699 -> 1702).
When a send's request went out and no answer came back, the composer said
"Send failed" and offered the draft back. If the server had in fact
accepted it and only the reply was lost, sending the draft again
delivered the message twice. Nothing identified the first attempt, so
nothing could check.
Each send now carries its own Message-ID (on the sending identity's
domain, RFC 5322 §3.6.4), kept on the draft if it comes back. A failure
that may have happened after the server acted (no answer, a timeout, a
5xx from the proxy) is followed by asking the server what it did:
- a message with that Message-ID was submitted (EmailSubmission/query by
emailIds, RFC 8621 §7.3): it was sent, and the composer says so;
- one exists with no submission: it was created and never sent; it is
removed from Sent and the failure stands, so resending is safe;
- none exists: the failure stands;
- the server can't be asked either: the composer says it couldn't confirm
and to check Sent, instead of a plain "Send failed".
A refusal (4xx) means the server did not run the request, so it is not
checked. Sending a draft again that came back from a failure asks first,
and sends nothing if a message with its Message-ID already exists;
submissions are expunged after the server's hold period, so later on any
surviving copy counts as sent (every failure path removes the copy it
made).
New strings: 3, in all ten catalogs (1699 -> 1702, no new fallbacks).
On a phone or a narrow list, rows are two lines, and labels went on a third
line of their own. A row is a fixed height at each density, and that third
line fit it only at Comfortable: at Cozy, the default, the labels were cut
off at the bottom, and at Compact they sat outside the row.
They now sit on the sender's line, after the name, which has room to spare,
so the row's height is unchanged at every density. When the line runs short
the name gives way first, then each label truncates; the date stays.
Reported in coffey-labs/ihasmail#35.
(cherry picked from commit 22490d8fe0190d85d8039a977435245b0d7da3cc)
The repository moved from inbuxa/ihasmail-inbuxa to inbuxa/inbuxa-webmail,
matching inbuxa-server and inbuxa-admin. Point the source links, the image
name and the package link at the new name. The OAuth client id stays
ihasmail-inbuxa, since that is what the server registers.
The webmail half of inbuxa's DLP (dlp-and-mail-flow-rules spec, §2.5,
§4):
- A send the server's DLP rules refuse (inbuxa:dlpWarning or
inbuxa:dlpBlocked) comes back to the composer with the rules' notices
instead of a generic "Send failed". A warning offers "Send anyway…",
which asks for a reason and sends again with inbuxa:dlpOverride; the
server records the reason. A block can only be answered by changing
the message.
- A message DLP held for review says so on sending ("Held for review:
it's sent once a reviewer releases it"), from the submission's
inbuxa:held.
- Tests: the override travels with the submission only when there's a
reason; refusals are told apart from other errors.
Nine new English strings (the notice labels, the prompt, the toasts);
the other catalogs fall back to English until translated.
inbuxa can now switch IMAP, POP3 and ManageSieve off one at a time,
server-wide and per organization, and the session lists what is still
allowed for the account (legacyAllowed). Where the webmail said
"legacy protocols are off", it now also covers the case where only
some are:
- Security & sessions, above app passwords: "Your organization has
turned off POP3 for mail apps. Mail apps that use it can't connect
to this account; others still can."
- The Administration dashboard: "Some legacy mail protocols are off for
your organization: POP3."
- An organization's sheet in Administration: its switch stays the
all-or-nothing one; when only some are off it names them and points
to the console, where they're switched one at a time, and "Turn
legacy protocols back on" turns them all back on.
With every protocol off, the existing wording shows, as before. From a
server that doesn't send legacyAllowed nothing new appears.
3 new strings in all nine catalogs, unreviewed.
Tested: unit tests for reading the session and a tenant's switches;
the existing tests updated for the new field; typecheck; the whole
suite (1475 tests); and in headless Chrome against a local server with
POP3 off, where Security & sessions showed the new note.
Deleting a person's account is the console's now, beside locking it and
legal holds: the console asks why, for the audit log, and says when a
hold keeps the data. Where Delete was, the account's page says so and
links to the account in the console when the server names one. Groups,
lists, domains and tenants keep their delete here.
2 new strings in all nine catalogs, unreviewed.
Switching to a locked account handed to the reader moved only the mail.
Now calendar, contacts and files follow it as well, through a new
viewAccountFor that the three stores use for what they show. Settings,
signatures and push keep ownAccountFor, so nothing of the reader's is
ever written into the locked account (inbuxa AL-7).
The picker sorted folders A-Z by path, with Inbox first, so a folder
dragged into place in the sidebar turned up somewhere else when moving
mail. It now walks the tree in compareFolders order, the sidebar's
order with every folder expanded: Inbox, then the saved order, then
the special folders, then A-Z, with subfolders under their parent.
treeOrder lives beside compareFolders. A folder the walk from the top
cannot reach is appended rather than dropped, so it stays pickable as
it was before.
Closes#1
(cherry picked from commit ea03406646062359f74e16ad8a8aed074b4dc409)
With conversation view off, marking a message unread from the list --
the hover button, the right-click menu -- marked that message. Opening
it and pressing Mark as unread in the toolbar above it marked every
message in its thread, and so did Move to, Report spam and Delete.
The setting already reaches all the way into the reading pane: the list
draws one row per message, and `visibleMessages` narrows the pane to the
one opened. The toolbar was half converted. Its labels were right --
Mark as unread against Mark as read, the star, the labels shown -- all
of those read `messages`, which is the narrowed set. Only `rowIds`, the
one thing actually handed to the action, still read `thread.emailIds`.
So the button said one message and did the whole conversation.
`rowIds` is now the same question `visibleMessages` answers for the
pane, asked of the same ids, with the same fallback: an id that names
nothing in the thread -- a link from somebody with conversation view on,
a stale `m` in the URL -- shows the conversation, so the toolbar takes
the conversation. Conversation view on is unchanged: nothing is singled
out, so the whole thread comes back as before.
No new strings.
(cherry picked from commit f627bfc1237d6e8bbc728147022f624c3834d648)
A website contact form mails the site's own address: From and To are
both info@thesite, and the person who filled the form in is in Reply-To.
Replying addressed the draft to info@thesite -- the site's own desk --
instead of to them.
The reply already knows two shapes. A message somebody sent me is
answered to its Reply-To, which is what that header is for. A message
*I* sent is answered to the people I wrote to, and deliberately not to
my own Reply-To, which is where answers to me belong and would send my
reply to myself. A contact form passes the test for the second: every
address in From is mine.
So it fell down the chain the second shape keeps for a message with
nobody obvious to answer -- To without me, then Cc, then, having run
out, every address on the message, which here was mine alone.
The Reply-To now goes in that chain, one step before the last: when no
recipient but me is left and the message names a Reply-To that is not
mine either, that address is who it is really from. Keeping it after the
Cc is what leaves a message I did send alone -- somebody I actually
wrote to still beats my own Reply-To, which is the case the existing
guard was built for and its test still holds.
No new strings.
(cherry picked from commit 01dc322aebcff0e8075c54f81eb7d171a32fb9e7)
Reading a message fetches its remote images through this server, so the
sender learns nothing about the reader. Quoting the same message into a
reply fetched them directly: same pixel, same reader, but the request
carried their IP and user agent -- exactly what the proxy withholds.
A quote now proxies them the way the message view does. That alone would
be wrong, because a proxied URL belongs to this deployment: sent
unchanged it would reach the recipient as images only this server can
serve, broken for them and a beacon back here. So buildEmailObject turns
them back into the addresses they came from, beside the pass that
restores images blocked under pr411 and the one that turns editor blob
URLs into cid: references.
Deployments with the proxy off are unaffected: the quote fetches
directly, as reading does there.
Three tests from pr411 asserted the address sat in src when images were
allowed, which was the old behaviour; they now ask whether the draft
fetches it at all, proxied or not.
No new strings.
(cherry picked from commit 23557a72a2a72088081792f8ea0cabedea4e7bcb)
Replying sanitized the quoted body with allowRemote: true, so quoting
fetched every remote image in the message whatever the reader had
decided about it. A tracking pixel in the quote then reported the
message read, and the address live, to whoever was counting -- the thing
leaving the images blocked was meant to prevent. Edit as new and opening
a draft that quotes a message did the same.
The decision now lives in one place, remoteImagesAllowed(), asked with
the same inputs the reader's answer used: the image policy, the trusted
senders, whether the sender is a contact, and whether Show images was
pressed on that message. The last of those was component state, so it
moves to the mail store, where the composer can see it.
Blocked images already keep their address in data-ihm-remote, so nothing
is lost by not fetching: it goes back on the way out, and the sent quote
is what its sender wrote. The recipient's client decides for itself, as
it would with any other client's reply.
Before pr408 this needed a rich-text default to reach; the format offer
made it reachable from plain text, which is how it was found.
No new strings.
(cherry picked from commit d329b33912921a851c548bffef5085e5fbf72bed)
Switching a reply between plain text and rich text converted whatever
body the draft was showing. Going from plain text to rich, that meant
the quoted message came back as the "> " text quote run through a
converter -- the sender's formatting, images and links gone, even though
the original markup was sitting on the draft untouched.
Both forms of the quote are prepared when the reply opens, so keep them
on the draft and re-attach the right one when the format changes. Only
what the author typed above the quote is converted. Where the quote
can't be found any more -- edited by hand, or a draft that quotes
nothing -- the whole body is converted as before, which is what every
non-reply draft does.
No new strings.
(cherry picked from commit 88f9e6c50a04f8ffc4702d1d1e3cffa6a93e7690)
A reply opened in the format the settings ask for, whatever the message
being answered was written in, and the per-draft switch was buried in
the composer's ⋮ menu. Replying in plain text to a rich text message
throws away the formatting; replying in rich text to a plain-text one
overrides what the sender chose to write in.
When the two disagree the composer now says so above the editor -- "This
message is rich text", with a Switch button and a dismiss -- and the
draft still opens in the format the settings ask for. Switching converts
that draft only and leaves the setting alone; switching from the ⋮ menu
answers the offer too. Forwards get it as well, where the formatting
being passed on is somebody else's.
What counts as rich text is hasHtmlAlternative(), which reads the body
part's own type: `htmlBody` is derived (RFC 8621 4.1.4), so a plain-text
message has one too and its presence proves nothing.
The mock said otherwise -- it returned an empty `htmlBody` for a
plain-text message, where Stalwart 0.16.21 returns the text/plain part
in both lists. Both builders now answer as the server does, so the path
this feature depends on is exercised in development rather than only
against a real mailbox.
Two new strings, translated in all nine catalogs; the buttons reuse the
menu's existing "Switch to plain text" / "Switch to rich text". The
count falling back to English stays at 16 in every language.
Fixes#407
(cherry picked from commit d992442b8194be5e9c48204332c7243d9587b4ca)
Name the reviewer in both Dutch catalogs, FEATURES and ROADMAP, under both of his handles, and record that his wording stands.
(cherry picked from commit aaa86e96d66e2431a8c98467712a977d4035bf76)
Michael (mbjboon-netizen) sent the final corrections for nl.ts and the Dutch
permission labels and signed the language off, so Nederlands no longer
carries the Beta flag in the picker.
The main catalog changes 52 values, mostly "regels" -> "filterregels" and
"post" -> "e-mail(s)". The permission headings move from compound nouns
("Accountbeheer") to verb phrases ("Accounts beheren"), and the reviewer's
note on that is kept in the file. No keys were added or removed, and every
placeholder is intact.
One entry is kept as it was: "It {damage}, ..." stays "Het {damage}, ...".
{damage} is filled with a verb phrase ("stops in the middle of a line"), so
the added "is" would have doubled the verb.
README, FEATURES, ROADMAP and KNOWN-ISSUES now say Dutch has been reviewed
and the other eight have not.
(cherry picked from commit e30fd73d7dbb1463859efbc4048f680d21d64c56)
Folder subscriptions are the reader's own and they have none in an
account handed to them, so only Inbox showed. Every folder shows while a
locked account is in view, and Hide from list is gone there.
When the server hands a locked account to the reader (urn:inbuxa:jmap
delegation), the account popover offers it. Only mail follows the switch;
the reader's own settings, push and notifications stay theirs. A red bar,
a red wordmark with a padlock and the tab title say which account is in
view. Read delegates can't change anything, organize delegates can't
delete, and writing needs send-as. A delegation taken away drops back to
the reader's own mail.
14 new strings in all nine catalogs, unreviewed (inbuxa AL-7, AL-8).
The logo, favicons and app icons are served from public/img under fixed
names with a browser cache of hours, and the service worker fetches them
through that cache. After the mark changed on 2026-09-27, returning
visitors kept the old cat until their copies expired, and the favicon
and an installed app's icon hold on longer still.
Every URL that names one now carries ?v=BRAND_V (src/lib/brand.ts,
brandImage()): the header, sign-in, About, the mail empty state, the
notification icons, index.html's favicon links, the manifest's icons
and the service worker's shell and notification icons. Date-stamped,
never a counter, for the sites' ASSET_V reason; the three static files
carry the value written out, and the comment says to keep them in step.
The webmail showed ihasmail's cat-and-envelope as inbuxa's mark. The new
mark keeps the family's face, paws and colors, over a server with a bay
for each piece of the suite: the letter (webmail), a prompt (console),
status lights (server).
- img/inbuxa-mark.png (header, sign-in, About) and img/logo.png (the
mail empty state and the custom-name fallback).
- favicon.ico, favicon-64, apple-touch-icon (opaque white, as before),
icon-192/512, and icon-maskable, now on an opaque ground with the
mark inside the safe circle.
- Login.tsx: 120x126, the new mark's proportions; 120x143 would have
stretched it. Every other use sizes by one dimension.
- The service worker fetches images network-first, so installed copies
pick the new ones up without a cache version bump.
The lead now says what inbuxa is: a mail server, its administration
console and this webmail, installed together under the AGPL, with the
name set apart in the brand teal. A new "The suite" table lists the
mail server, the console (linked, for sessions that may administer),
this webmail's version and inbuxa.org.
4 new strings in all 9 catalogues; the old webmail-only lead is dropped
from them, since nothing looks it up any more.
Settings > About shows which webmail node answered (NODE_NAME, else the
container hostname) and which inbuxa node it talks to: the address the
server's name resolves to from the webmail, named by its PTR record. The
server only tells administrators its node name, so the webmail works it
out itself. Fetched from /api/about/nodes on every visit, cached for a
minute server-side, for troubleshooting a cluster.
Fork-only: upstream ihasmail runs one webmail against one server.
4 new strings, translated in all 9 catalogues.
When inbuxa-server's AI spam classification is on, it records the model's
answer in an X-Spam-LLM header: a tag (LLM_<category>[_<confidence>]) and,
in parentheses, the model's explanation. The full message now asks for it,
and where it's there:
- the message details show "Language model's opinion" beside the spam
filter's own working, with category, confidence and explanation;
- a message in Junk carries a banner saying the same.
Both say it's one of several signals the spam filter weighed, never the
reason on its own, as the server's spec requires. The explanation is model
output and is only ever rendered as text. Nothing shows without the header,
so a server without the feature, or with it off, looks as before.
Translations: two new strings, "Language model's opinion" and "One of
several signals the spam filter weighed", in all eight catalogues (16
entries). Category and confidence come from the server and aren't
translated.
inbuxa-server renames the identifiers that carried the upstream name (its
SPEC.md §2.4). Upstream's capability for the registry (x:) objects is now
urn:inbuxa:jmap:registry, beside the fork's own urn:inbuxa:jmap, which is
unchanged. There's no alias, so this lands with the server change and
deploys with it. The mock advertises the new name too. No user-visible
strings change.
The browser tab, and anything that takes its name from the document title,
read INBUXA. The manifest, the server's app name and the sign-in card all
have it lowercase; the title was the one place left in caps.
Prod's APP_NAME override was set to inbuxa at the same time; the code
default already was.
The title the tab falls back to before the session names the app was the one
user-visible string the brand pass missed; setBaseTitle overwrites it as soon
as the session arrives, so it shows only for that first moment.
The brand is lowercase inbuxa. This changes what the app calls itself by
default, the wordmark's accessible name, the sign-in card's version line, the
installed app's name in the manifest, and the four translated strings that
name the console or the mail server.
Those four are source strings, so their catalog keys changed with them in all
nine languages; the translations keep their text with the name corrected. No
key was left behind, and no language falls back on more strings than before:
1643/1662 translated, 19 falling back, in each of the nine, unchanged.
Code identifiers, capability URNs, env var names and comments are untouched.
GitHub went dark with the account suspension on 2026-09-20 and GitLab was
retired on 2026-09-22, so links to either no longer resolve. Repository,
file, release and download links now point at git.coffeylabs.org, images
at registry.coffeylabs.org, and old GitHub issue and pull request links at
coffey-labs/ihasmail-github-archive, whose numbers match GitHub's.
INBUXA's tenant switch (legacy-protocols LP-9 to LP-18) in the
administration. Each tenant's sheet gains "Legacy mail apps": whether IMAP,
POP3, ManageSieve and sending from mail apps are on or off on the tenant's
domains, and the switch.
Nobody turns it off by accident. "Turn off legacy protocols…" first shows
who would notice -- every account in the tenant that signed in with a
legacy mail app in the last 30 days, with the protocols and when (LP-15) --
and the statement of what it means, "for everyone in {tenant}" (LP-16),
then asks for the phrase "turn off legacy mail", matched exactly (LP-17).
Turning it back on is one click; the server refuses while it has legacy
protocols off for everyone, and its words are shown. A tenant's switch
closes no port, so the statement names none.
It needs the domain permissions the server checks for the switch; with
read-only access the state shows and the buttons don't. On a server that
isn't INBUXA, or is older, the section isn't there.
The dashboard says so while legacy mail is off for the signed-in
administrator's organization (LP-18), from the same session flag as
Settings › Security's line.
Every new string in all nine languages, the register each catalog uses, and
the count in each language's plural forms.
When the mail server has turned off legacy mail protocols -- IMAP, POP3,
ManageSieve and sending from mail apps -- for this account, whether for
the whole server or for the account's organization, Settings › Security
says so at the top of App passwords, the section people come to when a
phone won't connect:
Your organization allows only {app} and JMAP apps, so phone and desktop
mail apps can't connect to this account.
This is INBUXA's legacy-protocols LP-19. The server reports it per
account as legacyProtocols on the urn:inbuxa:jmap account capability
(contract C-1); anything short of a plain "disabled" -- an older server,
another server, no session yet -- reads as on, so the line never appears
where it isn't true.
The app's name comes from {app}, as everywhere else. Translated into all
nine languages, in the register each catalog already uses.
INBUXA's webmail built its own source into every image: the whole tree,
web and server, packed as dist/source.tar.gz with an identity string
beside the link naming the exact tree it came from. The sign-in page and
Settings > About offered that download.
It answered the AGPL precisely -- the source of *this* build, uncommitted
work and all -- but it paid for that precision by carrying 2.5 MB of
source into production on every deploy, to a repository that is public
and already has it. The fork is at github.com/inbuxa/ihasmail-inbuxa;
the version shown directly above the link already names the commit the
build came from, so the link and the version together say the same
thing the archive said.
Both links now go there, through the mechanism upstream ihasmail already
has and this fork had replaced: the server's SOURCE_URL, read from
/api/config on the sign-in page and from the session in About, with
web/src/lib/source.ts as the fallback before either answers. That
mechanism is better than a hardcoded URL for the deployer who patches
this tree -- they set SOURCE_URL and both links follow -- which is the
case the AGPL is actually about. The defaults in config.ts, the compose
file and .env.example move from the upstream repo to this one, since a
build from this tree is a modified ihasmail and its offer is ours.
Removed with it: scripts/source-archive.mjs and its type stub, the Vite
plugin that ran it, __SOURCE_ID__, and SOURCE_ARCHIVE/SOURCE_ID. The
build no longer shells out to git or tar, and nothing is written next
to the app.
Links to Coffey-Labs/ihasmail that are credit rather than a source
offer -- the README's "built on", the translation issue link -- are
left alone.
No new strings: "AGPL-3.0 source" is unchanged, and the About line keeps
its existing {source} placeholder, now filled with the host and path
instead of a file name.
Upstream's {app} placeholder (#406) replaces most of the fork's own
renamed strings: the user menu, the About heading and its version line
now say INBUXA because APP_NAME does, not because the fork wrote it in.
Kept from the fork: inbuxa.org rather than ihasmail.org, no Documentation
entry until INBUXA has its own, the INBUXA mark and wordmark, the "Built
on ihasmail" credit, and the About note that says nothing about the
server software. DEFAULT_APP_NAME stays INBUXA.
The credit's placeholder is {project} now, so the name of the project is
not spelled inside a key that upstream's new test reads as a hard-coded
app name.
APP_NAME renames an instance, but only the sign-in page, the title bar and
a few headings used it. Two dozen sentences wrote "ihasmail" into
themselves, so a renamed instance still told people to keep an ihasmail
tab open and offered to open mail links "in ihasmail".
Those sentences now take the name as {app}, which also lets a translator
put it where their language wants it. brand.ts grew useAppName() for
components and currentAppName() for the few places that build strings
outside React.
Left as they are: the Files folder "ihasmail", the Sieve script
"ihasmail" and ihasmail.org. Those name things a person can go and look
at, and renaming them would rename real data.
All nine catalogues keep their translations: the name inside each one
became the placeholder. Three of the strings had no translation before
and still fall back to English.
A test walks the sources and the catalogues so a new sentence can't
hard-code the name again.
- Reorder folders by dragging, with special folders first (#402, #405).
- Open the composer full screen, as a setting (#401, #404).
- Dutch translation update (#403).
FEATURES.md stays deleted here, as in bb25355.
The folder tree ignored sortOrder: Inbox came first, then everything
A–Z, so Sent ended up among ordinary folders. The tree now lists Inbox,
then any order the user has chosen, then the other special folders
(Drafts, Sent, Archive, Junk, Trash), then the rest A–Z. Stalwart gives
every folder sortOrder 0 until someone orders it, so an existing
sidebar changes once, to that default.
Dropping a folder on the top or bottom quarter of a row puts it above or
below that row, with a line to show where it will land. Dropping on the
middle still nests it. Special folders can now be dragged, to be
reordered but never nested; on those, the whole row reorders by the
nearer half. The folder menu gains Move up and Move down, for the
keyboard and touch. Inbox stays first.
A reorder numbers the level 10 apart and writes only the folders whose
number changes, in one Mailbox/set. The order is saved on the server,
so it follows the account to every device and to other JMAP clients.
No new strings: Move up and Move down were already translated.
Fixes#402
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
Settings > General > Composing has a new switch, "Open the composer full
screen". With it on, every new composer, whether a new message, reply,
forward or reopened draft, starts maximized. Restore still shrinks it to
a window. A draft put back after an undone or failed send keeps the size
it had. It's off by default, and on a phone, where the composer already
fills the screen, it changes nothing.
One new string, translated in all nine catalogs. The count falling back
to English stays at 16 in every language.
Fixes#401
Co-authored-by: Claude Opus 5 (1M context) <[email protected]>
- The sign-in footer names the build "INBUXA webmail" and links to
inbuxa.org, next to its AGPL source link.
- About gives the INBUXA webmail version, and credits ihasmail on a line
of its own.
- The user menu's "About ihasmail" is "About INBUXA", to inbuxa.org. The
Documentation entry pointed at ihasmail's docs; it's gone until INBUXA
has documentation of its own.
- The startup log says "mail server:" rather than naming the server
software.
"About INBUXA" and "Built on {ihasmail}" are translated in all nine
catalogues.
jcoffey-dev
jcoffey