• v27.1-rc.16
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 8m13s
    ci / test (push) Skipped
    ci / announce (push) Successful in 34s
    Pre-Release

    jcoffey-dev released this 2026-11-18 01:33:27 +00:00 | 2 commits to main since this release

    The sixteenth release candidate of the 27.1 series: a security fix for
    import jmap, which could send the inbuxa profile's API key to the source
    server, and certificate checks that no longer trust the distrusted emSign
    intermediates.

    Security

    • import jmap no longer sends the inbuxa server's API key to the source.
      With no source token given, or --auth-bearer given with no value, it
      took the API key from the default ~/.config/inbuxa profile and sent it
      to the source server as a bearer token, so whoever runs or watches that
      server could take over the inbuxa server the profile names. Affected
      27.1-rc.13 to 27.1-rc.15; migrations the server runs itself were not
      affected. If you ran import jmap with a profile holding an API key and
      no source token, rotate that key. (GHSA-x8xv-p366-95w2)
    • TLS certificate checks no longer accept certificates chained through the
      distrusted emSign intermediates (rustls-webpki 0.103.17, webpki-root-certs
      1.0.12; RUSTSEC-2026-0382, RUSTSEC-2026-0383).

    Found by Coffey Labs.

    Changed

    • import jmap no longer reads the shared profile, so what 27.1-rc.13 added
      for it no longer applies: it needs --url again and the source's own
      credentials (a flag, an INBUXA_MIGRATE_* variable or the prompt), and
      --profile is gone from it.
    • import-directory still reads the profile, but sends its API key only to
      that profile's own server (the same scheme, host and port). With a
      --url for another server, the key comes from a flag, a variable or the
      prompt.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS (signed as SHA256SUMS.minisig; minisign public key in the README).

    Downloads
  • v27.1-rc.15
    github/ci (branch) GitHub Actions
    ci / github (push) Successful in 11m13s
    ci / test (push) Skipped
    ci / announce (push) Successful in 10s
    github/ci (tag) GitHub Actions
    Pre-Release

    jcoffey-dev released this 2026-11-17 16:10:16 +00:00 | 7 commits to main since this release

    The fifteenth release candidate of the 27.1 series: upstream v1.1.0's
    dependency updates, and export no longer sends a message again on every
    run when the target keys it differently.

    Changed

    • Upstream v1.1.0 is merged in. It reorganized upstream's source tree; the
      fork keeps its own layout and takes the dependency updates, including
      mail-parser 1.0 and rusqlite 0.43. Upstream's new console banner is left
      out.

    Fixed

    • export no longer imports a message again on every run when the archive
      and the target key it differently, as with a message carrying two
      Message-ID headers: the archive keeps both, a JMAP server's messageId
      one. While target emails are left unpaired, a message about to be imported
      is first parsed by the target (Email/parse), and one it already holds is
      matched instead, with its keywords and folders brought in line like any
      other match. A target without Email/parse gets the message imported as
      before. The same key settles a batch whose import ended without a clear
      answer, so one that did arrive is not sent twice. Upstream fixed the same
      case in v1.0.17; this is our own fix.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS (signed as SHA256SUMS.minisig; minisign public key in the README).

    Downloads
  • v27.1-rc.14
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 7m53s
    ci / test (push) Skipped
    ci / announce (push) Successful in 49s
    Pre-Release

    jcoffey-dev released this 2026-11-13 20:15:17 +00:00 | 15 commits to main since this release

    The fourteenth release candidate of the 27.1 series: POP3, Fastmail, Zoho and
    Zimbra sources, a reconcile report that a migration was complete, and
    upstream v1.0.16's Exchange fixes.

    Added

    • import pop3 imports from a POP3 server: the whole maildrop into one INBOX,
      keyed by each message's UIDL so a later run adds only what arrived since.
      pop3s:// is TLS, pop3:// upgrades with STLS (or sends cleartext with
      --allow-cleartext). It is additive -- a message gone from the server is
      kept, since POP3 mailboxes are routinely emptied after download -- and it
      deletes nothing on the server. --estimate reports counts and sizes from
      STAT/UIDL/LIST before any body is fetched.
    • import zoho and import zimbra import mail over IMAP, as presets for
      import imap. zoho fills in Zoho's server for your region (--region, or
      --host for one not listed); zimbra points at your own Zimbra host (IMAPS
      on 993, or --starttls on 143). Both take only an address and password (or
      an app-specific password), reuse the whole IMAP pipeline, and support
      --estimate.
    • import fastmail imports from a Fastmail account over JMAP. It is import jmap with Fastmail's server and bearer-token sign-in filled in, so it needs
      only an API token; with no --account-* it imports the account Fastmail
      marks primary. Mail always; calendars and contacts where that account
      advertises them.
    • reconcile <archive> reads an archive folder by folder and reports it: a
      message count and a content checksum for each folder, totals and a checksum
      for the whole, and an integrity check that every message resolves to stored
      content and a real folder. It is read-only and touches no network. Compare
      the per-folder counts against the source mailbox to prove a migration was
      complete; the checksum shows two archives -- an export and a re-import, say --
      hold the very same mail. It exits 8 when the archive is not sound.

    Changed

    • Upstream v1.0.16 is merged in.
    • Outlook categories become valid JMAP keywords, the same way IMAP
      --mime-keywords does it (Catégorie Rouge is cat_gorie_rouge), and
      duplicates are dropped. Before, only the case was lowered, so Project review gave a keyword JMAP doesn't allow. A read-receipt request no longer
      adds $notified. This is for EWS and Graph.

    Fixed

    • Exchange EWS and Graph: all-day events and birthdays landed a day early
      east of UTC. The date is now taken in the event's time zone. Outlook's
      "no date" (year 4500 or later) is no longer imported as a real date.
      Archives imported before this keep the wrong dates until the item changes
      at the source, so re-import into a fresh archive to correct them.
    • Exchange EWS: Exchange 2019 servers were asked for a schema version that
      doesn't exist, so every call was refused once and sent again.
    • Exchange EWS: hidden system folders (Recipient Cache, GAL Contacts)
      were imported as mailboxes and address books. They are skipped now.
    • Exchange EWS: a mail folder under a calendar or contacts folder could stop
      a later run with a FOREIGN KEY error. It is filed under its nearest mail
      folder on every run.
    • Exchange EWS: an attendee's or contact's ItemId could replace the item's
      own, giving UNIQUE constraint failed. Tasks and posts in a listing shifted
      the ids around them. One item that failed to parse or store stopped the rest
      of its folder; it is now logged and counted, and the folder goes on.
    • Exchange EWS: event attachments, your own response to a meeting and an
      event's private flag were never fetched. They are imported now.
    • Exchange EWS: a folder with no class (Outlook's (This computer only)
      contacts) was always taken for mail, and contacts, appointments and tasks
      in a mail folder such as Deleted Items were stored as email. A class-less
      folder now takes its kind from its items, and mail folders skip non-mail
      items, also in --estimate.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS (signed as SHA256SUMS.minisig; minisign public key in the README).

    Downloads
  • v27.1-rc.13
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 9m2s
    ci / test (push) Skipped
    ci / announce (push) Successful in 11s
    Pre-Release

    jcoffey-dev released this 2026-11-13 06:12:07 +00:00 | 28 commits to main since this release

    The thirteenth release candidate of the 27.1 series: shell completions and a
    man page, secrets read from files, a Microsoft 365 request throttle, a shared
    server profile, and a guide that shows real progress.

    Added

    • completions <shell> prints a shell completion script (bash, zsh, fish,
      elvish or powershell) to standard output, and man prints a man page in
      roff. Both are generated from the command itself and reach no server.
    • Every secret read from an INBUXA_MIGRATE_* variable can instead be read
      from a file named by the same variable with _FILE appended, the Docker
      and systemd secrets convention (INBUXA_MIGRATE_PASSWORD_FILE,
      INBUXA_MIGRATE_API_KEY_FILE, and so on). One trailing newline is ignored;
      setting both a variable and its _FILE form is an error. This keeps a
      secret out of both the environment and the command line.
    • import exchange-graph and import exchange-ews take --max-rps to cap
      how many requests start per second across all worker connections -- a
      proactive throttle to stay under a rate-limited Microsoft 365 tenant's
      limit, alongside the existing honoring of 429/Retry-After. Off by
      default (uncapped).
    • import jmap and import-directory read the inbuxa server's address and
      API key from a shared profile, ~/.config/inbuxa/config.toml, so the
      target need not be given each time. [profile.<name>] sections hold a
      url and either an api-key or an api-key-file (a path, so the key can
      live in its own file); --profile or $INBUXA_PROFILE pick a section, and
      the default is default. inbuxa-cli reads the same file. A --url or an
      INBUXA_MIGRATE_* variable still wins, so nothing changes when they are
      given; --url is now optional on these two commands when a profile
      supplies it.

    Changed

    • The guide page shows a real progress bar with a running count and
      percentage while a preview or move runs, reads the counts from the run's
      structured progress stream rather than scraping its log, and when a run
      ends it says how many accounts didn't finish and points at the table. A
      reload reconnects to a run already in progress -- the guide outlives the
      browser -- and now says so.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS (signed as SHA256SUMS.minisig; minisign public key in the README).

    Downloads
  • v27.1-rc.12
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 9m15s
    ci / test (push) Skipped
    ci / announce (push) Successful in 26s
    Pre-Release

    jcoffey-dev released this 2026-11-09 14:44:21 +00:00 | 56 commits to main since this release

    The twelfth release candidate of the 27.1 series: upstream v1.0.15, keywords
    from IMAP Keywords: headers, and fixes for Maildir folder names and EWS
    --mailbox.

    Added

    • IMAP: --mime-keywords adds the phrases of each message's Keywords:
      header as keywords. Exchange shows its categories over IMAP this way.
      Each phrase is lowercased and its spaces become _. Letters outside ASCII
      are dropped, and a phrase can't name a system keyword such as $seen.

    Changed

    • Upstream v1.0.15 is merged in.

    Fixed

    • Maildir: folder names kept in modified UTF-7 are now decoded in full
      (.&ZeVnLIqe-.&U,BTFw- is 日本語.台北). Folder selection and role
      guessing use the decoded name. Before, only the last part of a name was
      decoded, for display.
    • Exchange EWS: with Basic or delegated OAuth sign-in, --mailbox naming
      another mailbox the user has full access to imported the user's own
      mailbox instead. Folders are now addressed in the mailbox --mailbox
      names.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS.

    Downloads
  • v27.1-rc.11
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 8m28s
    ci / test (push) Skipped
    ci / announce (push) Successful in 1m1s
    Pre-Release

    jcoffey-dev released this 2026-11-04 03:51:17 +00:00 | 61 commits to main since this release

    The eleventh release candidate of the 27.1 series: upstream v1.0.14, and
    transfers that stall no longer wait out the whole limit.

    Changed

    • Upstream v1.0.14 is merged in. Its HTTP timeouts are left out, since this
      project already has its own, and so is its Dockerfile.

    Fixed

    • Google Takeout: Portuguese (Brazil) system labels now map to mailbox roles
      and keywords, or are dropped, like their English counterparts.
    • Google Takeout: a message labeled neither Opened nor Unread is now
      imported as read. Only English and Portuguese (Brazil) labels are recognized,
      so an unread label in another language becomes a folder and the message
      imports as read.
    • Google Takeout: a contact without a UID is stored once rather than once per
      contact group file. Archives from an earlier version keep the old copies, so
      re-import into a fresh archive.
    • A download or upload that stalls partway now fails after 5 minutes of silence
      and is retried, rather than waiting out the limit on the whole body: 30
      minutes for a download, over two hours for the largest uploads.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS.

    Downloads
  • v27.1-rc.10
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 8m32s
    ci / test (push) Skipped
    ci / announce (push) Successful in 27s
    Pre-Release

    jcoffey-dev released this 2026-10-31 22:25:43 +00:00 | 69 commits to main since this release

    The tenth release candidate of the 27.1 series: real file names kept
    through an account export.

    Added

    • export-files keeps the real name of every file, directory and link
      whose name had to change on disk, in the manifest's new files.names,
      and import files restores them. A real name that is taken in its
      directory, or can't be a name, is left as it is on disk with a warning,
      so a renamed entry never takes another's place; a listed link whose name
      is taken is not made.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS.

    Downloads
  • v27.1-rc.9
    github/ci (branch) GitHub Actions
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 7m15s
    ci / test (push) Skipped
    ci / announce (push) Successful in 11s
    Pre-Release

    jcoffey-dev released this 2026-10-31 21:13:50 +00:00 | 73 commits to main since this release

    The ninth release candidate of the 27.1 series: an account export read
    back whole.

    Added

    • import files reads an account export back into an archive: the tree
      export-files writes, specified at
      https://coffeylabs.org/specs/account-export/. Besides the mail,
      contacts, calendars, Sieve scripts and files, it reads what only the
      manifest holds: real folder names, roles and subscriptions, the default
      address book and calendar, calendar colors and time zones, the active
      script, media types, links and identities. Copies of a message in several
      folders come back as one message in each. Paths in the manifest are
      checked to stay inside the export, and no symbolic link is followed. An
      archive gains the source kind files and a table for what it read at its
      next import; until then inspect and the other read-only commands call it
      an older layout.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS.

    Downloads
  • v27.1-rc.8
    github/ci (branch) GitHub Actions
    ci / test (push) Skipped
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 6m31s
    ci / announce (push) Successful in 23s
    Pre-Release

    jcoffey-dev released this 2026-10-31 02:42:42 +00:00 | 77 commits to main since this release

    The eighth release candidate of the 27.1 series: what a server needs to
    run migrations into itself, from its admin console.

    Added

    • migrate --progress json writes one JSON event per line on stdout (a
      step begins or ends, an account ends, the run ends), for a program that
      runs a migration and shows its progress.
    • plan --answers writes the guide's plans from its answers in a file, so
      a program can ask the questions itself and run migrate. The answers
      hold no secrets.
    • --stay-on-url sends every request to the --url host, whatever the
      server's session advertises, for a server reached at its own loopback or
      through a tunnel. import jmap, export, export-directory and
      import-directory take it.
    • import imap --google-key-from-env reads the Google service account's
      key from $INBUXA_MIGRATE_GOOGLE_KEY, and a plan step can name it as
      the googleKey secret.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS.

    Downloads
  • v27.1-rc.7
    github/ci (branch) GitHub Actions
    ci / test (push) Skipped
    github/ci (tag) GitHub Actions
    ci / github (push) Successful in 9m54s
    ci / announce (push) Successful in 10s
    Pre-Release

    jcoffey-dev released this 2026-10-30 23:58:18 +00:00 | 83 commits to main since this release

    The seventh release candidate of the 27.1 series: upstream's 1.0.12 and
    1.0.13 merged in, with out-of-office replies, --replace-source, and files
    kept working with inbuxa.

    Added

    • The out-of-office reply comes across: imported from a server's
      VacationResponse, and exported to the target's, in place of copying the
      script the server keeps for it.
    • WebDAV, CalDAV, CardDAV: --replace-source removes the other recorded
      sources of the same kind, and what was imported from them, before
      importing, so a moved share leaves one tree in the archive.
    • Files keep their executable flag where the server has one. An archive
      gains the column at its next import; until then inspect and the other
      read-only commands call it an older layout.

    Changed

    • FileNodes are read in either shape servers use: nodeType and type, as
      inbuxa and other 0.16-line servers spell them, or @type and mediaType
      (draft-ietf-jmap-filenode-18, as in Stalwart 1.0). An export asks the
      target which it takes and writes that one. Upstream dropped the older
      shape; this fork keeps both.
    • The Graph device-code sign-in asks for Files.Read, so the default run
      reaches OneDrive.
    • iCalendar and vCard parse failures say what was wrong and quote the line.

    Fixed

    • IMAP: children of a \Noselect parent folder kept their place instead of
      landing at the top level.
    • JMAP import no longer holds every blob of a page in memory at once, which
      large messages could exhaust.
    • CalDAV, CardDAV: items with bare CR line breaks, as Kerio Connect sends,
      are read.
    • EWS: a bare --auth-bearer takes the API key or token from the
      environment without asking for --ews-client-id.
    • --account-name as an administrator takes the data account from the
      principal's accounts, as RFC 9670 defines it.

    Binaries for linux/amd64 and linux/arm64. Verify with SHA256SUMS.

    Downloads