Files
inbuxa-server/crates/relay/Cargo.toml
jcoffey-dev 3e1c8bd8df Relay: port 25 sessions are capped, and a client that doesn't read is dropped
The relay's SMTP door timed only its reads. The banner, every reply and
the flush after it were written with no timeout, so a client that
pipelined NOOPs and never read its replies held its session for good once
the socket buffers filled. Nothing capped sessions across the relay
either: the only limit was per remote address, keyed on the full IPv6
address, so anyone with an IPv6 /64 (or a few thousand IPv4 addresses)
could open sessions until the relay ran out of file descriptors. Then
accept() failed on the link port too, the downstream couldn't relink, and
outbound delivery couldn't open sockets. No authentication was needed.

Now every write on port 25 (banner, refusals, replies) must finish within
the command timeout (5 minutes), or the session ends. A new setting,
maxSmtpSessions (default 1000, must be above zero), caps the sessions open
at once from all senders together; past it a connection gets
"421 4.3.2 Too busy" and is closed. The per-IP limits count an IPv6
sender by its /64, and an IPv4-mapped address as the IPv4 address. The
relay spec says so.

Found in a security review.

Test: in crates/relay, a session whose client pipelines NOOPs and never
reads was still open an hour on (paused clock), a third session with
maxSmtpSessions 2 got the 220 banner, and three addresses in one /64
were counted as three senders. Now the session ends at the write
timeout, the third session gets 421 and a closed session's place is
taken again, and a /64 shares one count.
2026-11-17 16:24:10 -07:00

46 lines
1.8 KiB
TOML

[package]
name = "inbuxa-relay"
description = "inbuxa Relay: a small edge appliance that takes mail in for one downstream inbuxa server and sends its mail on (docs/spec/features/relay.md)"
license = "AGPL-3.0-only"
version.workspace = true
edition = "2024"
[[bin]]
name = "inbuxa-relay"
path = "src/main.rs"
# The footprint rule (RL-30): no inbuxa server crate. Everything here is
# small, and most of it the server already uses.
[dependencies]
inbuxa-relay-proto = { path = "../relay-proto" }
inbuxa-outbound-tls = { path = "../outbound-tls" }
rustls-native-certs = "0.8"
aws-lc-rs = { version = "1" }
smtp-proto = { version = "0.2.3" }
tokio = { version = "1.53", features = ["rt-multi-thread", "net", "io-util", "time", "sync", "macros", "signal", "fs"] }
rustls = { version = "0.23.43", default-features = false, features = ["std", "aws_lc_rs", "tls12"] }
tokio-rustls = { version = "0.26", default-features = false, features = ["aws_lc_rs", "tls12"] }
rustls-pki-types = { version = "1", features = ["std"] }
rustls-webpki = { version = "0.103", default-features = false, features = ["std", "aws-lc-rs"] }
rcgen = { version = "0.14", default-features = false, features = ["crypto", "pem", "aws_lc_rs"] }
x509-parser = { version = "0.18" }
hyper = { version = "1.11.1", features = ["server", "client", "http1"] }
hyper-util = { version = "0.1.20", features = ["tokio"] }
http-body-util = "0.1.5"
tokio-tungstenite = "0.30"
futures-util = "0.3.34"
serde = { version = "1.0", features = ["derive"] }
serde_json = "1.0"
[features]
# For the server's system tests only: `INBUXA_RELAY_TEST_MX=<port>` sends
# every domain's mail to 127.0.0.1 on that port. Never in a release.
test-mx = []
[lints]
workspace = true
[dev-dependencies]
hyper = { version = "1.11.1", features = ["client", "http1"] }
tokio = { version = "1.53", features = ["test-util"] }