Coffey Labs is now Coffey Labs LLC, an Arizona limited liability company. Copyright lines and SPDX-FileCopyrightText headers naming Coffey Labs or John Coffey now name Coffey Labs LLC. Upstream copyright notices are unchanged.
Deliverability spec (inbuxa-drafts specs/deliverability.md), the server
side. Every node that sends mail checks itself once a day, at its own
minute in the first hour (UTC), and when an administrator asks:
- its outgoing addresses (the connection strategy's, or what its EHLO
name resolves to), their reverse DNS and whether it resolves back,
and nine blocklists, read by each list's own codes so a refused
query is never taken for a listing (DL-1 to DL-6);
- for every domain: SPF for each address, each DKIM key (by signing a
message that's never sent and verifying it as a receiver would),
DMARC, the MTA-STS policy against the MX, TLS reporting, and the
domain blocklists (DL-7 to DL-12);
- whether it holds a certificate for its EHLO and MX names (DL-13).
It keeps one report per node, facts only; the console grades them.
- inbuxa:DeliverabilityReport: /get, and a create that asks every node
to check now, broadcast as DeliverabilityCheck (DL-15). A tenant
administrator gets their own domains only (DL-20).
- inbuxa:DeliverabilitySettings: which built-in lists are left out, and
the lists themselves (DL-6).
- sysDeliverabilityGet, sysDeliverabilityUpdate, sysDeliverabilityCheck;
a tenant ceiling always turns the last two off.
A school, or any organization that doesn't want people's mailboxes
shared, can now turn that off (multi-account spec, MA-C). Two switches
at two levels, as the legacy-protocols switch has:
- mailSharing: people may share their own mail folders;
- addAccounts: people may add other accounts to the webmail (read by
the webmail's account switcher, MA-B).
inbuxa:SharingPolicy/get and /set hold them: the server's policy has
the singleton id, each tenant's has the tenant's id. Both default to
on, so nothing changes until someone turns one off. A tenant's
administrator changes their own tenant's (the domain's permissions, as
for its protocols switch); only a server administrator with
sysSharingUpdate changes the server's; a tenant can never be looser
than the server (forbidden). Every change goes through the audit log,
and rebuilds every access token, here and on every node.
With mail sharing off for an account's tenant (or the server):
- Mailbox/set and IMAP SETACL refuse to start or widen a share
(forbidden / NO [NOPERM]); narrowing or ending one is always allowed;
- shares already made give nothing while it is off: an access token
leaves out mailbox grants from such an owner. They stay stored, so
turning sharing back on restores them (John, 2026-10-05);
- a lock's and a shared mailbox's grants are an administrator's and
always count, and group membership was never a share.
The session's own account says mailSharing and addAccounts, the
stricter of the two levels, so front ends can hide what is off.
Tests: a new sharing_policy suite with a school tenant, its own
administrator and two people outside it: on by default; the school's
administrator turns it off but can't touch the server's; an old share
stops working and a new one is refused while someone outside the school
is unaffected; a shared mailbox in the school keeps working; the server
off can't be loosened by the tenant; on again restores the old share;
ending a share works while off; and every change is audited. A unit
test covers the stricter-only rule. sharing_policy_tests, jmap_tests,
imap_tests, account_lock_tests and audit_log_tests pass (RocksDB).
A shared mailbox (support@, legal@) belongs to no one person: nobody
signs in to it, and the people assigned open it beside their own mail
at an access level an administrator chose. An account lock already is
most of that: it keeps receiving mail, refuses every sign-in, and its
delegates reach it through real grants on every container (so IMAP,
DAV and JMAP honor them), never including Share. So a shared mailbox is
a lock of a second kind (multi-account spec, MA-S; John, 2026-10-05).
Lock gains kind: "lock" (the default, so stored locks read as before)
or "sharedMailbox", set on create and fixed after. A shared mailbox:
- needs no reason to make, change or end;
- holds up to 100 people, where a lock holds 10;
- runs its own Sieve replies and redirects, so an automatic
acknowledgement goes out (a lock answers no one);
- records only what is sent as it (audit_send_as, which now covers it),
not AL-9's access and per-change records, which would bury the log
for a busy desk;
- sends only as itself (MA-S3): From and Reply-To must be its own
addresses, so answers come back to the mailbox and not to whoever
replied; anything else is forbiddenFrom.
The session marks it delegation: {locked: true, kind: "sharedMailbox"},
so a front end that knows no kind still treats it as a lock. The
console's layout gains Management › Directory › Shared Mailboxes
(CustomComponent/SharedMailboxes).
Tests: the account lock suite now goes on to a shared mailbox: made
without a reason with twelve people, sign-in refused, the session's
kind, its vacation reply delivered, an answer sent as it and recorded
as the agent with no per-change records, and a Reply-To naming the
agent refused; a lock unit test reads a stored lock without a kind.
account_lock_tests, jmap_tests, audit_log_tests and imap_tests pass
(RocksDB).
#146 stopped a group's members sharing its mailboxes on. The same
shortcut lets them through everywhere else a group owns things: a
member counts as the account's owner, so Calendar/set, AddressBook/set
and FileNode/set skip the share check, and so does the WebDAV ACL
method. Who has what a group owns is decided by who is in the group.
For a member through a group only (is_group_member_only):
- Calendar/set, AddressBook/set and FileNode/set refuse a shareWith
change as forbidden, on create and update; for files at the top of
the account too, not only inside a folder;
- the DAV ACL method answers 403 on the group's calendars, address
books and files;
- myRights reports mayShare false (JmapRights::owner_rights), and the
DAV current-user-privilege-set leaves out all and write-acl.
Reading who something is shared with is unchanged, as in JMAP.
Tests: a new jmap::group_share module has a member create with a
share, create without one (and check myRights), share afterwards, and
an outsider reach each kind; the WebDAV ACL test has a member try the
ACL method on the group's folders; the IMAP ACL test now checks #146's
SETACL refusal, which had no test of its own. jmap_tests, webdav_tests
and imap_tests pass (RocksDB). specs/multi-account.md MA-D0.
A group's members reach its mailbox through membership, which counts
as owning the account, so every ACL check was skipped: on a scratch
server a member gave an outsider read access to the group's Inbox with
one Mailbox/set shareWith, with no administrator involved and nothing
audited. Who is in a group is an administrator's decision.
AccessToken::is_group_member_only names that case (in the account
only through a group, without Impersonate). For such a member:
- Mailbox/set with a shareWith change, on create or update, is
refused as forbidden;
- IMAP SETACL and DELETEACL answer NO [NOPERM];
- myRights reports mayShare false, and MYRIGHTS leaves out "a";
every other right stays.
Administrators and the account itself are unchanged. The JMAP ACL
test's group section now checks all three for a member and that the
outsider still has nothing (specs/multi-account.md, MA-D0, G1).
jmap_tests and imap_tests pass (RocksDB). The IMAP refusal has no test
of its own yet; imap_tests passing shows the rest is unchanged.
A group's members can send as the group, and the message says only
From: the group, so nothing recorded which person sent it. Every
submission whose envelope sender belongs to another account now writes
an audit record: the person as actor, an EmailSubmission target named
by the address and owned by that account, and "Sent as <address>",
with ", from <account>" when it went out through the sender's own
account rather than the group's.
A delegate's send is left to AL-9's record, and a send from the
sender's own address writes nothing. No Sender: header is added: the
audit log is where the real sender is named. email_submission_set now
takes the access token, from its one caller.
The audit suite has a group member send once as the group (one
record, with the address, account and details) and once as themselves
(none) (specs/multi-account.md, MA-D0a, G2).
Each node stores histograms as running totals since it started. A sample
didn't say which node wrote it (the node was only in the id's low bits),
so a reader couldn't diff totals per node, and the console diffed across
nodes: on the three-node production cluster the delivery attempt time
read 14.7 s over the last hour against 0.7 s from the nodes' own figures.
x:Metric/get now returns nodeId alongside timestamp, both from the id.
The telemetry suite checks every sample carries it.
Phase 4 of the journaling spec.
- inbuxa:JournalEntry/query and /get (sysJournalSearch): filter by time,
sender, recipient, either, direction, subject words, Message-ID and
journal, newest first; the whole report only when asked for.
- inbuxa:JournalExport/set (sysJournalExport): a reason is required; a
ZIP of the matching reports with manifest.csv, exceptions.csv and
manifest.sha256, up to 10,000 reports and 1 GB.
- inbuxa:JournalVerification/set (sysJournalGet): chains and reports
rechecked.
- Every search, listing, read, export and check is written to the audit
log before anything is returned, with existing actions only.
- Catalog entries for the three objects; spec as-built notes.
journal_tests: administrators can't search; a Compliance Officer searches,
lists, reads a report, exports (reason required) and checks the chain;
the officer can't change journals; each of those is in the audit log.
Phase 3 of the journaling spec.
- A journal's destination: builtIn (true for journals stored before) and
archiveAddress, at least one. Reports to an archive are queued from the
empty sender, one per address, flagged so they're never journaled.
- A pending record per report. When the queue lets go of one without
delivering it (refused, expired, deleted), it becomes its own entry in
the built-in journal under the sending journals' retention, the
journal's archiveFailures (count, last time, reason) goes up, and the
audit log records it; if that can't be written it stays queued.
- Journal it: a rule action naming a journal, on mail flow rules and
beside a DLP rule's block, warn or hold. A journal whose scope chooses
nobody takes only what rules send it.
- The report lists recipients a rule added or redirected to under
"Added by rule", by rule name.
- A rule's route is cleared between messages in one SMTP session, with the
new journal marks; a second message used to keep the first one's route.
tests/src/system/journal.rs: destination validation, a rule-only journal
fed by a rule that also adds a recipient, an unreachable archive's report
kept in the built-in journal with the failure counted, a report delivered
to an archive here and not journaled itself.
Phase 2 of the journaling spec.
- A copy of each message is taken in MessageWrapper::queue, after DLP and
transport rules, for every enabled journal that takes it (direction and
scope: everyone, or accounts, groups, domains, tenants). If the copy
can't be taken the message isn't queued (temporary failure).
- The journal report: the envelope one field a line (sender, To, Cc, Bcc
from the envelope, list members from their ORCPT, direction, held for
review), then the queued message byte for byte as message/rfc822.
- The built-in journal under J in the inbuxa subspace: one chain per node
whose links name each entry by SHA-256, so entries can expire out of
chain order; purge leaves a marker, and verify catches an entry changed
or removed early and a report that doesn't match.
- Retention per journal (30 to 3650 days); an entry keeps what it was
written with. The daily maintenance purges what's due, keeping entries
whose people a legal hold covers (deleted accounts a hold keeps too),
and records the counts in the audit log.
- inbuxa:Journal get/set, audited by the request layer. Permissions
680-683: administrators see and change journals; the Compliance Officer
sees, searches and exports. Whoever changes journals may grant search and
export without holding them, so officers can still be appointed.
- Catalog entries (inbuxa:Journal, source "journal"); spec as-built notes.
tests/src/system/journal.rs: validation, internal mail with a Bcc,
outgoing into two journals, incoming over LMTP, the report and its
original, tamper and early removal caught, hold-aware purge, retention
changes leave entries alone, disabled and removed journals take nothing.
inbuxa:DlpSettings (singleton, urn:inbuxa:jmap): keepHeldDays, 1 to 90,
7 by default (settled answer 5 made it a setting). sysDlpPolicyGet reads
it, sysDlpPolicyUpdate changes it, server-level, audited by the request
layer. Each held message keeps the days it was given, and the sender's
notices say that number. Privacy catalog entry; spec §2.6 updated.
mail_rules_tests: 7 by default, 0 refused, 3 set and a message held
afterwards expires 3 days after it was held, the expiry notice says 3.
An EmailSubmission create's response carries inbuxa:held (dlp-and-mail-flow-rules spec, §2.6, §4): true when the message is held for review, false otherwise, so the webmail can say so at once. A sender can't read the review queue, and a held message's sendAt is its real send time, not the century-off release, so this is how the sender learns. mail_rules_tests checks both values.
The hold action now holds (dlp-and-mail-flow-rules spec, §2.6), where
until now it blocked.
- At DATA a hold decision queues the message with its release a century
off (the queue's future-release mechanism, so the stored format is
unchanged and an older node just never sends it), transport rules
still applied, and replies 250 Held for review. A review record under
R/h + queue id keeps the sender, recipients, subject, size, rules and
detector counts. The sender is told when the rule asks.
- smtp/queue/held.rs: release (each recipient due now, its next notice
as far off as it was, its lifetime counted from the release), reject
(removed from the queue, the sender told, with the reviewer's note),
and expiry: the daily clean-up rejects what nobody reviewed in 7 days,
recorded as the server's doing.
- inbuxa:HeldMessage get/set: the review queue, sysDlpReviewGet to list
and read (preview, 64 KB of text, only when asked for and recorded as
blobAccess), sysDlpReviewUpdate to release or reject, a reason
required and audited by the request layer; no create or destroy;
server-level only.
- Guards: Emails > Queue refuses to change or delete held mail; the
sender can't unsend it.
- Privacy catalog entry for inbuxa:HeldMessage; spec §2.6 as built.
Tests: mail_rules_tests gains the whole flow (held and listed with
counts, sender notified and nothing delivered, queue and unsend
refused, preview recorded, reject needs a reason and tells the sender
the note, release delivers, expiry returns it, decisions audited with
reasons). smtp inbound, system_tests (after one BlobNotFound in
antispam, the known flake, then clean), features and common unit tests.
Phase 2f of the DLP and mail flow rules spec: the rules now run on mail
an authenticated sender submits, after the DATA system script and
before headers and DKIM signing (§2.1).
- smtp/inbound/mailflow.rs: builds what the rules look at from the
message (subject, the text version of each body, one level of attached
messages, attachment text via the extractor, 10 MB of text at most)
and the envelope (sender's groups and tenant; each recipient local or
not, and its groups). Skipped entirely when no enabled rule applies to
outgoing mail. Rules that can't be loaded refuse with a 451: nothing
unchecked leaves.
- Block: 550 5.7.1 with the rule's notice. Warn: 550 5.7.1 with the
notice and how to override: "[override: reason]" at the start of the
subject, taken out before the message goes on (settled answer 1).
Until phase 3, a hold rule blocks rather than let mail through.
- JMAP: EmailSubmission takes inbuxa:dlpOverride {reason}; a refusal
comes back as inbuxa:dlpWarning or inbuxa:dlpBlocked with each rule's
name and notice (description too, for older clients).
- Audit: one record per DLP match, the sender as actor, action create,
target a message: the recipient domains, each rule with its detectors'
counts, the outcome, an override's reason. Never the matched text. No
new audit action: an older node that meets one fails its daily
clean-up, which would make rolling back unsafe (spec §2.7 updated).
Tests: mail_rules_tests gains the DLP flow over JMAP (no rules, warning
with rule and notice, local recipient not warned, override with a
reason, block that no reason passes, the subject tag stripped from the
delivered message, audit records with no card or key text). smtp
inbound tests pass; system_tests passed twice after one timeout in the
email delivery tests that didn't recur.
Phase 2e of the DLP and mail flow rules spec, the API half.
- inbuxa:MailRule/get and /set under urn:inbuxa:jmap. Rules convert
through serde, so what a client sends is the stored format. A create
or change is validated whole (Rule::validate) and refused with the
property at fault; id, createdBy, createdAt and updatedAt are the
server's. Every change goes through the request layer's audit record.
- Six permissions, ids 674-679 (enum and schema labels): mail flow rules
(sysMailRuleGet/Update), DLP rules (sysDlpPolicyGet/Update) and held
mail (sysDlpReviewGet/Update, for phase 3). Either kind's permission
gets through the gate; the handler shows and changes each rule only
with its own kind's. All server-level: a tenant is refused (settled
answer 3).
- Administrators get all six; the server-level Compliance Officer gets
DLP rules to see and held mail to review (settled answer 4), added
once to an existing server's officer role by the grant mechanism,
which gains an officer audience.
- Privacy catalog entry for inbuxa:MailRule.
tests/src/system/mail_rules.rs: create, list in order, validation,
server-set properties refused, update, kind-separated permissions for
an officer, destroy, audit records.
POST /api/directory/test takes a saved directory's id, an address and
optionally a password, and answers whether the directory opened, what a
recipient lookup of the address finds (account or group, with its
aliases, groups and name), and whether the password signs in. A wrong
password is told apart from a directory that can't be reached or is set
up wrong.
It calls the directory itself, below the sign-in path: a test never
creates or updates an account, never counts toward the sign-in ban and
doesn't depend on which domains use the directory. A password hash a
directory returns is never sent back. OIDC directories report their
discovered issuer; they take no passwords.
For server-level administrators with directory update permission. The
console's guided directory setup uses it to test a real person before
any domain is switched over.
Personal-data catalog spec, §6 (Phase 3c).
inbuxa:DataInventory/get evaluates the catalog against the server's
live settings and says what this server holds: for each source and each
object that can hold personal data, its categories and whose data it
is, whether it is collected here at all, what bounds its retention (the
live value of the setting that does, or unbounded), whether it leaves
the host and to which endpoints, and a summary. Every host that
receives something is listed once as a candidate processor with what it
receives. Inside a tenant it answers with the tenant's slice and none
of the server's processors. Read-only, with sysComplianceGet.
inbuxa:InventorySnapshot/get is the history: a dated copy of the
evaluated inventory, recorded when it changes -- after a registry write
to an object the inventory reads, after inbuxa's log, audit or AI
settings change, and on the daily clean-up -- and kept as long as the
audit log's records. ids: null lists every snapshot, newest first; the
full inventory only when asked for.
The catalog is embedded and parsed at start (new dependency: toml,
MIT/Apache); the evaluation is a pure function of it and the live
facts, so each configuration is tested without a server. Loopback
endpoints stay on the host; any other configured endpoint leaves it.
Tested: unit tests for the evaluation (a new install's defaults, an
external blob store, a hosted AI endpoint, telemetry off, a tenant's
slice, hosts from URLs, loopback), snapshots, and the fact gathering's
store and duration rules; the compliance system test, extended (the
officer reads the inventory, a plain user is refused, a tenant's
officer sees its slice and no processors, a webhook to another host
becomes a processor and a snapshot names x:WebHook, a retention change
reads through); the system, audit, legal hold and account lock suites;
fork checks. The system suite failed once of three runs with an email
import's blob not found, in antispam.rs; the same happened once in
purge.rs on the previous branch. Nothing here touches uploads; noted
for a separate look.
The schema conflicted as a binary file: taken from main and the one
edit here re-applied (sysComplianceGet after sysLegalHoldExport). The
import kept the permission count at 673, so the new id stays 673.
Retested on the merged tree in its own target directory: the
compliance and system suites pass. One earlier system run failed in
purge.rs (an imported blob not found) and didn't recur.
Personal-data catalog spec, §7 (settled 2026-09-28).
sysComplianceGet (673) sees the data inventory and compliance
overview: superusers and, for their tenant's slice, tenant
administrators, by default and through the one-time grants on servers
that already have their roles stored.
A Compliance Officer role at server level holds it with reading and
exporting the audit log, placing, widening, releasing and exporting
legal holds, seeing account locks, and reading accounts, lists,
domains, tenants and roles. It changes no server setting, creates or
deletes no account, and can't shorten audit retention.
A tenant's accounts can hold only roles of their own tenant (MT-3), so
the tenant role is one "Compliance Officer" role per tenant, without
holds (LH-13): made once for every tenant a server has, and whenever a
tenant is created. While nobody holds it, it is removed with its tenant
so it doesn't block the delete, and put back if the delete is refused
for another reason. Both roles carry a user's own permissions too,
since roles given to a person replace the default user role, which a
tenant's accounts can't hold anyway.
Every server makes these once, new or existing -- the built-in roles
are only made on a server with none -- and records each under P c, so a
role an administrator deletes stays deleted.
Tested: unit tests (neither role changes a setting beyond a user's
own; holds for the server's officer only; per-place records); a new
compliance system test (one server-level role; an officer reads the
audit log, places and releases a hold, and is refused a setting, an
account and audit retention; a tenant gets its role, whose holder reads
the tenant's audit log and no holds; a tenant with an unused role is
deleted and the role goes with it); the system, audit, legal hold,
account lock and SCIM suites; fork checks. The directory suite needs
its LDAP container and wasn't run here.
Personal-data catalog spec, default D1 (settled 2026-09-28): log files
were never deleted. inbuxa:LogSettings.keepForDays says how many days
rotated log files are kept; unset (null) keeps every file, as before,
and a new install sets 30 days.
It is a fork-owned setting, stored under T + l as audit retention is,
not a field on x:TracerLog: that object is also stored inside
x:Bootstrap with a field after it, so a new field would change
x:Bootstrap's stored format. Server-level, with the tracers'
permissions (sysTracerGet, sysTracerUpdate); changes are in the audit
log, before and after.
Log files are local, so every node deletes its own: hourly, and at once
when the setting changes on that node. Only regular files named
<prefix>.<something> in each enabled log tracer's directory, last
changed more than the limit ago, are removed; the file being written is
never that old, and nothing else in the directory is touched. Minimum
one day. The catalog classifies inbuxa:LogSettings and points the log
file's retention at it.
Tested: unit tests for the file rule (only this log's old files; the
current file, other files and directories stay) and a purge on disk;
the system suite, which reads, sets, refuses zero, restores null and
checks the audit records; fork checks.
Eight conflicted files resolved, plus the lock file and the schema:
- crates/services/src/task_manager/spam_classifier.rs: upstream's rules
update now replaces existing rules, DNSBL servers, lookups and file
extensions, keeping only whether each is on. Taken, with one difference:
an object an admin edited is kept as it is. Every object an update writes
is fingerprinted (content without `enable`, SHA-256, stored under
SUBSPACE_INBUXA "Sf"), and only one that still matches is replaced.
Scores are never replaced, as upstream has it. The AU-1.10 summary record
now names what was added, replaced and kept, and the bundled rules are
marked applied only when the update fully succeeded, so a failure runs
again on the next start. The marker becomes "3.0.2+2", which runs the
update once on upgrade to fingerprint every rule still as bundled.
- crates/common/src/network/autoconfig/autodiscover.rs: upstream's rewrite
(implicit TLS first, labeled SSL), with the per-protocol switches (LP-7,
LP-14a) passed in as a filter.
- crates/store/src/backend/mysql/{search,write}.rs: upstream's chunked
deletes (no unbounded first DELETE, stop on a short chunk, halve the
chunk on the new chunk-too-large errors) inside the fork's query timeout.
- crates/smtp/src/lib.rs: the fork's queue spawn kept. It already fixed the
stall upstream fixes here (a node without outboundMta stops accepting
mail at about 1024 queued messages), and follows role changes live.
- crates/jmap/src/registry/mapping/bootstrap.rs: the log path stays
/var/log/inbuxa/; upstream's PowerDNS mapping taken.
- crates/main/Cargo.toml: the AGPL-only license kept, version 0.16.24.
- tests/src/jmap/principal/get.rs: the fork's capabilities kept.
- resources/schema/schema.json.gz: merged as JSON; upstream relabeled the
vendor Sieve extensions "(Stalwart)", kept as "(vnd.inbuxa)".
- Cargo.lock: upstream's, with the fork's crates added by Cargo.
Also:
- tests/src/smtp/inbound/spam_rules_kept.rs: an edited rule survives an
update, an unedited one is updated, rules from before fingerprints are
handled, and the audit summary says so. Upstream's own spam_rules test
passes unchanged.
- tests/src/smtp/reporting/reschedule.rs moves to port 19058; upstream's
new spam_rules test took 19057.
- tools/fork/renames.py renames the "(Stalwart)" labels and the default
log path, so neither conflicts again.
- tools/fork/notice-check.py compares against the newest snapshot in the
checked-out history instead of the upstream branch head, so moving the
branch no longer fails other open pull requests.
- tests/src/directory/issuer.rs (since v0.16.23) stays out, and is on the
build check's known list: it tests issuer-based directory routing, which
the fork doesn't have (DIR-2).
- Strip report: docs/fork/strip-reports/v0.16.24.{md,json}.
Upstream commit: af37a234981722493b74623a983581691d2b70b6
Enterprise-only files removed or emptied: 63
Enterprise-only snippets removed: 118 in 50 files
Dangling module declarations removed: 5
Edits turning enterprise off: 25
Third-party code: 14 files, 0 not in THIRD-PARTY.md
Renamed identifiers: 62 in 18 files
Verification: clean
The same Enterprise footprint as v0.16.23. The build check fails only on
tests/src/directory/issuer.rs, unchanged since v0.16.23: it calls a helper
from upstream's Enterprise-only OIDC test, and tests issuer-based directory
routing, an Enterprise feature. main has never carried it.
The legacy-protocols switch was all or nothing. An operator can now stop
POP3 and keep IMAP: each of IMAP, POP3 and ManageSieve has its own
switch, server-wide on inbuxa:ProtocolPolicy and per tenant on
inbuxa:TenantProtocolPolicy (properties imap, pop3, manageSieve).
legacyProtocols stays as the kill-all: setting it sets all three, and it
reads "disabled" exactly when all three are off. A policy stored before
this has only legacyProtocols and reads as all three at that value, so
existing servers and tenants carry over unchanged. In one /set, a
protocol named beside legacyProtocols overrides it.
SMTP submission keeps no switch of its own: sign-in over it is refused
only when all three are off, as the single switch did (LP-6), so
turning one protocol off never stops a mail app sending. For a tenant,
the server's switches and the tenant's count together.
Server-wide, a change closes the listeners of whatever is now off and
puts back the saved listeners of whatever is on again, both in one
change if asked; listeners of a protocol still off stay saved. Sign-in,
autoconfig, autodiscover, PACC (now prepared once per combination) and
the suggested DNS records all follow each protocol separately. A tenant
may turn a protocol on only while the server has it on (LP-9), and the
refusal names which. The JMAP session adds legacyAllowed, the protocols
still allowed for the account; legacyProtocols there keeps its meaning
for older webmail builds. Events name the switches ("pop3 disabled"),
and audit before/after reads every switch even from an older policy.
Tested: unit tests for the switches, the old-policy reading, the
server/tenant combination, the tenant refusal and listener refusal; and
tests/e2e/legacy_protocols.py against a running server, all 100 checks,
including new ones: POP3 alone off closes only its port and refuses
only its sign-in while IMAP and sending go on; only POP3 stops being
advertised; one change closes IMAP and reopens POP3; a tenant turns
POP3 off for itself, and can't turn IMAP on while the server has it off.
An item the hold covers whose stored record or content can't be read
goes in exceptions.csv with the path it would have had and the reason,
rather than being left out silently. The file is always in the ZIP, so a
header-only one shows nothing was missed, and manifest.sha256 carries
its hash beside the manifest's.
inbuxa:HoldExport/set takes a hold, optionally some of the accounts it
covers, and a reason; the collection runs in the background and get
says when it's ready. The ZIP has, per account, mail as .eml under its
folders, calendars as .ics, contacts as .vcf, files as stored, and the
archived items the hold keeps under archived/; a manifest.csv gives each
entry's account, kind, folder, date, whether it was archived, size and
SHA-256, and manifest.sha256 hashes the manifest. Accounts the hold
doesn't cover are left out, and items outside its date range are too:
live mail by arrival, events by start, and archived items the same way,
so an export doesn't carry deleted items that only another hold keeps.
The finished file is a blob of whoever started the export, so only they
download it, and it lasts as long as any upload (uploadTtl). Exports
are records under the hold (SUBSPACE_INBUXA H/e): never changed or
destroyed, each with its status, counts, size and checksum. Starting
one needs sysLegalHoldExport, an active hold and a reason, and is
recorded in the audit log like the audit log's own export.
The build is in memory and capped at 2 GB; bigger holds fail with a
message saying so, and are split by picking accounts.
Tested: unit tests for safe ZIP names and the manifest and its hash;
the legal_hold system test, on RocksDB, PostgreSQL and MySQL, exports a
hold end to end (live and archived mail, the manifest's hash, an asked-
for account the hold doesn't cover left out) and checks the refusals
(no reason, a user without the permission, a released hold) and the
audit record; and by hand from the console on a local server. Not
covered by a test: the archived-item date range with two holds of
different ranges over one account.
An account's or mailing list's name is only its local part, so the log
said "Account ken.gosling" where two domains could each have one; it
now says [email protected]. A change to a legal hold was
recorded under its id; the hold's current state is now read first, so
the record carries its case name and each change reads before/after.
inbuxa:LegalHold/get answers accountsCovered, itemsHeld and sizeHeld
when asked: the accounts a hold reaches now (deleted ones it keeps
included) and the archived items it keeps, with their size. Worked out
in one pass over accounts and archive, only for requests that name them.
Held items stay out of the user's quota, as all archived copies do
(LH-9).
Destroying a held account removes the login, as offboarding needs, but
keeps its data as a deleted account with no expiry, whether or not
undelete keeps accounts; its addresses stay reserved and its holds name
it from then on. Destroy-now refuses it, and its DestroyAccount task
defers itself while it's held or its time hasn't come. Holds placed or
released later freeze or free kept accounts in the same settle pass,
with 30 days' grace after the last release (LH-8, LH-10).
Placing or widening a hold freezes what's already archived in its scope
and range, its old deadline noted; releasing one gives each item no other
hold covers that deadline back, or release plus 30 days if later. One
pass over the archive does both and changes nothing twice (LH-6, LH-10,
LH-11). A held archived item can't be destroyed; restoring still can,
and the hold is named only to callers who may see holds (LH-7). Audit
records about a held account survive the purge (AU-7).
Fixes the daily clean-up of expired archived items (UD-13), which never
found any: the registry's unfiltered query reads an all-ids index that
archived items aren't in. Items are now walked account by account, kept
deleted accounts included. Expired items were still removed whenever
their account's archive was read.
inbuxa:LegalHold get/set places a hold on accounts, groups, domains,
tenants or the whole server, with an optional date range. A hold's range
and scope can only widen, a released hold is read-only, and none is ever
deleted. Placing, changing and releasing each need a reason and are
audited (LH-1, LH-3, LH-10, AU-12).
Permissions 669-672 (see, place, widen or release, export held data)
go to server administrators only; the tenant ceiling always strips them,
as it does Impersonate (LH-13). Schema: Compliance > Legal Holds.
What a hold keeps comes next, through the undelete hooks.
Also moves the lock expiry helpers below the lock module's imports.
A shared account refuses top-level folders, so an organize or full
delegate couldn't add anything to a locked account with no folders. A
delegate who may write now can, as the owner could; the reconcile after
the create grants it the new folder. Read delegates still can't (AL-6,
AL-7).
A locked account can't sign in (it fails as a wrong password does), its
sessions end on every node, refresh tokens stop working, and its Sieve
scripts forward and reply to nothing. Mail keeps arriving.
Delegates get real ACL grants on the account's mailboxes, calendars,
address books and files at read, organize or full, with the rights they
replaced restored on unlock. Folders made later are granted after the
create and in a daily sweep. Organize delegates can't destroy; send-as
needs organize or full. The JMAP session marks delegated accounts in
urn:inbuxa:jmap.
New inbuxa:AccountLock object with get/set, permissions 665-668, and a
Compliance > Locked Accounts entry in the schema. Lock, unlock and
delegate changes need a reason and are audited; delegate access and
writes are audited too (audit-hold-lock spec AL-1 to AL-12).
What administrators and the server itself do to the control plane is now
recorded, from inbuxa-drafts/specs/audit-hold-lock.md (AU-1 to AU-12):
settings, accounts, domains, roles and every other registry change, with
each field's before and after (secrets only as "changed"); the fork's own
settings objects; administrator sign-ins (and failed ones to administrator
accounts), master-user and recovery-admin sign-ins, once an hour per
account, method and address; access to another account's data through
impersonation or FetchAnyBlob, once an hour; exports and tamper checks;
and registry writes the server makes on its own, named by subsystem
(system:AcmeRenewal, system:auto-ban, system:directory-sync, ...), with a
spam rules update as one summary record.
No change without its record (AU-3): before a set method changes anything,
a pending record per requested create, update and destroy is written; if
that fails, the method is refused with serverFail. Its outcome follows as
a later entry. A change interrupted by a crash stays "unfinished".
Records live in the fork's subspace under L, as one SHA-256 hash chain per
node. The chain's head is stored, never cached, and every append asserts
it, so two writers can't take the same place. Nothing can edit or delete
a record; the daily purge removes the oldest past the retention (default
730 days, minimum 90) and records where the chain now starts, so
verification still passes. security.audit-recorded (647) copies each
record to webhooks, OpenTelemetry and the log; security.audit-write-failed
(648) reports a failed write.
New JMAP objects under urn:inbuxa:jmap: inbuxa:AuditEvent/get and /query
(filters: time, actor, action, target, account, tenant, outcome, address,
text), inbuxa:AuditSettings, inbuxa:AuditExport (CSV or JSON Lines built
on the server, each line with its chain hash, ending in a manifest; the
created object names the blob and its SHA-256) and
inbuxa:AuditVerification. New permissions sysAuditGet, sysAuditExport and
sysAuditSettingsUpdate: the Administrator role gets all three, the Tenant
Administrator role gets read and export, once, on existing installs too.
A tenant administrator sees records whose actor or target is in its
tenant, including a server administrator's changes there.
Sign-in method on the session: access tokens now remember how they signed
in (password, app password, API key, OAuth client, directory, master user,
recovery admin), including across the HTTP credential cache. New OAuth
access tokens carry their client id in the sealed claims; older ones show
as client "unknown" until they expire.
The schema gains the permissions, the two events and a Management >
Compliance > Audit Log link.
Stack: the request layer boxes every inner future where it's made. Without
that, a debug build overflowed the default 2 MB worker stack on a registry
set; measured with the same request, the branch and main now overflow at
the same stack size (between 1856 and 1920 KiB, debug), so the layer adds
nothing measurable.
Tests: unit tests in inbuxa-features and jmap; system::audit::audit_log_tests
(run with --ignored) passes on RocksDB, SQLite, PostgreSQL, PostgreSQL with a
read replica, MySQL, MySQL with a replica and FoundationDB. The system, JMAP
and SCIM suites pass. authorization.rs skipped fork permissions that guard
no registry object; the audit suite checks a plain user is refused instead.
ai-explain spec, amendment 1 (EX-22 to EX-28):
- answers are three or four sentences, max_tokens 160, cut at 700 chars;
- POST /api/explain streams the answer as server-sent events;
- each node remembers answers in memory (1,000, 24 h), keyed by the facts,
prompt version and model, shared by server-level administrators;
- resources/explain/settings.json.gz ships answers for settings at their
defaults, generated with prepare_setting_explanations (717 for 2026.9.27);
- the system prompt no longer carries the per-request marker, so a model
server can reuse it;
- inbuxa:Explanation gains source, answeredAt and preparedFor.
jcoffey-dev